Concrete System
High performance and clean. This system is fast and easy to install, and zero splash-back
means you won’t be wearing it at the end of the day. Plus, it’s 100% water cleanup for your
hands and equipment. Leave your harsh solvents at home.
Sun Safe & Eco-Friendly
2 key products make up the Hulk Concrete System.
Once it has been applied, you can take your time back-filling your foundation. Unlike other industry leading products, the Hulk Concrete System isn’t compromised by UV exposure as it contains zero bituminous resins that are prone to drying out and cracking and toxic for both the applicator and environment.
Step 1
Hulk Mastic
HS (Hulk System) Mastic, is our sun-safe, rubberized compound, that extends much
further, and sets up much faster then traditional tar / fiber glass mastics.
HS Mastic is white, and is typically used to fill voids, cracks, tie holes, tie back anchors, and around shoring piles and other protrusions and penetrations. HS Mastic is cold-applied, and can be installed with a brush, putty knife, or mechanically by caulking gun.
385%
Elongation
900psi
SEAMLESS
85%
THERAL STABILITY
Step 2
Hulk WP
Hulk WP® is a cold-applied, single component, fire-resistant
elastomeric membrane used for waterproofing.
Unlike many other waterproofing products, the coating is sun-safe and maintains peak performance in extreme temperatures. Almost zero splash-back and waste occurs during applications. Hulk WP® is formulated to provide ultimate hang strength when curing to 40 mils. Hulk WP® withstands UV, acid rain, salts, acidic soil, bacteria and is non-corrosive on foam.
Class "A"
Quicklinks
0
Solvents
>20 grams
VOC's/Liter
Step 3
Hulk SRT
Hulk SRT® is a structurally reinforcing textile, made of quartz
resin infused fiberglass, which has higher tensile strength/volumetric mass than
steel.
When immersed in Hulk WP®, the combination forms a seamless cast of
protection over your foundation wall(s). Hulk SRT® remains dimensionally stable
even when experiencing high temperature and humidity fluctuations.
550°C+
Thermal Protection
0/10
rot resistance
85%
Dimensional Stability
Technical Info
Technical Data Sheet (TDS)
Hulk System - Installation
Take a moment to familiarize yourself with the installation process.
Depending on the application, any Hulk System can generally be installed in 3 easy steps. Once installed, your project or foundation will have vastly superior protection over traditional waterproofing or peel n’ stick systems. Don’t believe us? We challenge you to take a hammer to both and decide for yourself!
Let's Get Started
HULK Systems wants to save the industry time.
We know how many evening and weekend hours can go into calculating materials for future jobs, affecting the bottom line. Use our calculator to quickly produce quantity estimates for any and all applications.
Contact Us
CONCRETE SYSTEM
Protect your project using our spray on HULK: WP membrane. No sagging or splashback, with options for high water table and blindside applications.
ICF BLOCK SYSTEM
Combines the waterproof nature of membrane with the impact resistance of dimple wrap in 1 monolithic system.
STRUCTURALLY INSULATED PANEL (SIP) SYSTEM
Designed specifically to address cementitious sheathing and underground joints in SIP projects, eliminating all water access points.
WOOD SHORING SYSTEM
When your timber structure needs waterproofing; the ideal system for leave-in-place shoring or OSB/wood-constructed foundations
